- Command to enable a terminal in Solaris
pmadm -a -p zsmon -s a001s -fu -i root -v `ttyadm -V`
-m "`ttyadm -d /dev/dty/a001s -l 9600 -s /usr/bin/login`"
where:
- zsmon - is the port monitor tag -- use a different one if appropriate.
- a001s - is the name of the port. Refer to your Digi manual for your device names.
- -l 9600 - sets the port for a baud rate of 9600.
The above command will enable the port for 9600 8,1,N. Consult your documentation if you wish to change these parameters.
For a Modem:
pmadm -a -p zsmon -s a001m -fu -i root -v `ttyadm -V`
-m "`ttyadm -d /dev/dty/a001m -l 9600 -s /usr/bin/login -b -r 1 `"
And then tip the /dev/dty/a001s device.
Last updated:
Aug 23, 2017